Sprayfoam of Southern California your roofing solution

Get to know more about the benefits

The two most prominent benefits are waterproofing / leak prevention and insulation value.
Many additional benefits also exist such as superior compressive strength, lightweight, self-flashing, durable and long lasting.

Leak free monolithic seal over your entire roof deck

Self flashing High insulation value / Rapid payback with energy savings

Strong adhesion and wind uplift resistance

Weather resistant

Lightweight and high strength

UL and FM approved systems

Elimination of ponding water

Info on sprayed polyurethane foam

Sprayed Polyurethane Foam is applied as a liquid using plural-component spray equipment to fill cracks and crevices. It then expands approximately 30 times its original liquid volume to form a hard, closed cell monolithic roof surface. The Polyurethane Foam dries within seconds after applied to the roof surface. Its expansion results in a weather tight roofing membrane that is fully adhered to the substrate.
The weight of polyurethane foam is between 2-3 pounds per cubic foot. One inch of polyurethane foam insulation plus 30 mils of an elastomeric coating weight approximately 60 pounds per 100 square feet, as compared to approximately 600 pounds per 100 square feet for a typical conventional four-ply built-up roofing system. This makes a sprayed polyurethane foam system ideal for reroofing as it is often possible to apply over an existing built-up roof without removing it. Sprayed polyurethane foam has an R-value of 6.85 per 1 inch thickness, enabling it to provide more thermal resistance with less material than any other insulation.
Once the sprayfoam has been applied to the proper thickness and finish specifications, a protective layer of elastomeric coating or gravel is applied. This protective layer produces a durable weather resistant surface and that can be walked on for normal maintenance.